CLUTCHES
PART NUMBER	DESCRIPTION	ENGINE	DIAMETER	TECHNICAL INFORMATION

M-7560-D46       (1)(2)

11" Clutch                Kit

V-8

11"

This kit increases clutch capacity of the 1996-98 Mustang Cobra 4.6L DOHC 4V by 10% (requires flywheel M-6375-G46 or equivalent) and increases clutch disc burst speed 10% over 1999-01 Cobra. Kit contains 2003 Cobra 11" pressure plate and 11" clutch disc.

NOTES:
1 Clutches have NO warranty!
2 All clutch discs have 1.0625"-10 spline hub.
3 Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel. Metric fasteners and dowel pins must be used with 10.5" clutches.
4 Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302.

Photos are representative only and do not necessarily depict the actual part. Specifications may vary. Please inquire if you have questions.